All Classes

Boston ABC Building License Prep

This 24-hour course prepares students for the City of Boston Building Code Exam. Prerequisite: Current Massachusetts Construction Supervisor’s License

Acoustical Ceilings I

This hands-on course introduces students to codes and industry standards related to exposed-grid ceiling installations. Topics covered are materials identification, job planning, print reading, laser technology, layout, and installation of exposed-grid ceilings. Please bring the following tools to class:   Snips, Pliers, Hammer, Tape Measure and a Pencil.  

Acoustical Ceilings II

This 8 hour course will demonstrate the installation of various types of metal ceilings. It will also include a demonstration of Axiom Edge Trim as well as soffit and panel applications. PRE-REQUISITE: must have completed previous ceiling installation class- Acoustical Ceilings. On- the- job experience may be substituted at the instructor’s discretion.

Advanced Drywall Grid & Soffits

Students will be able to: expand their knowledge of partition layout and installation methods through hands-on layout projects to create door openings, fascias, soffits, octagonal windows, archways, and radius partition walls. (This course builds on the basic principles governing metal framing and drywall installation explored and practiced in Basic Drywall). PRE-REQUISITE: must have completed Acoustical

Advanced Fall Protection & Rescue/ Hands on (Millbury)

This 24-hour hybrid course (16 hours hands-on and 8 hours online) is for members who work at heights and serve (or potentially serve) in leadership roles (foreman, steward, superintendent, site safety, etc.) managing those working at heights on commercial construction sites. It provides both knowledge and practical skills to gain competency and proficiency in supervising

ADVANCED ROOF FRAMING NY ELECTIVE

Advanced Welding

Prerequisite:  Basic/Beginning Welding/Pass Welding and Cutting test This course will prepare the Student for the AWS -1″ Plate Test.  Vertical, overhead, and torch operations will be covered.

Mobile Elevating Work Platforms (MEWPS)

This 8-hour hands-on qualification workshop combines classroom instruction with operating techniques to train participants in the safe operation of “Mobile Elevating Work Platforms” in compliance with OSHA regulations and ANSI standards. **Must Wear PPE!!! You will be training on the lifts and must be dressed as if going to an active jobsite! No exceptions! Failure

Ardex Surface Prep & Moisture Mitigation Certification

This 2- day class will cover moisture mitigation product applications, procedures and self-leveling techniques.  It will also include skim coat prep and deep fill ramping with a crack repair system.  THIS CLASS IS SPECIFICALLY DESIGNED FOR FLOORCOVERERS.

Asbestos Awareness Training

Asbestos awareness is crucial for safety training in various industries, especially in the construction industry. Workers must be educated in handling asbestos-containing products and structures to understand risks and protect themselves.

Assorted Mixed Bag – Skills and Safety

This class is an assortment of class for APPRENTICES ONLY. Can be used as one of your elective course. Labor History 2 (8 Hours) COVID-19 Construction Safety (4 Hours) Silica Awareness (4 Hours) Math for the Trades (4 Hours) Construction Masters Pro (4 Hours) Print Reading (14 Hours) Firestop Assemblies (2 Hours)

Basic Computers

This introductory 30-hour course covers the fundamentals of computer use. Students will be introduced to Microsoft Office and Google programs, including typing, spreadsheet and slideshow applications. We will learn to search the web effectively, check e-mail, and download and save files.  A portion of the class will be tailored to individual student needs, whether you

ICRA: Best Practices in Healthcare Construction in Occupied Facilities

This 24-hour hands-on course covers proper construction controls and procedures for limiting secondary infections to patients during hospital stays. This training is recommended for carpenters working in healthcare facilities.  

ICRA: Best Practices in Healthcare Construction in Occupied Facilities Refresher

This 8-hour re-certification workshop refreshes the ICRA Best Practices in Health-Care Construction. Members who do not complete the Best Practices Refresher course within one year after the expiration date of their certification must attend the 24-hour Best Practices in Health-Care Construction course. IF YOUR CARD EXPIRED MORE THAN ONE YEAR AGO YOU ARE NOT ELIGIBLE

Bridge Superstructure Training

This hands on course covers all aspect when working on bridges, including bridge safety, deck construction, terminology and codes.

Buffalo Welding Offsite Burgard H.S.

Burgard High School Located at 400 Kensington Ave, Buffalo, NY 14214 · Welding Class hours are from 8am-1pm  

Builders Level and Transit

Builders Level and Transit: This is a basic surveying course, you will learn to set up and operate a builder level and some basic use on the transit. You will be learning to shoot and transfer elevations with the level and basic building layouts with the transit including shooting angles.

Builders Level, Transit & Total Station

Builders Level, Transit:  This is a basic surveying course, you will learn to set up and operate a builder level and some basic use on the transit. You will be learning to shoot and transfer elevations with the level and basic building layouts with the transit including shooting angles. Total Station:  This hands-on course covers

Building Information Modeling-BIM

Building Information Modeling (BIM); Discussions of the Roles and Impacts of BIM in the Design, Construction Engineering and Management, Infrastructure Engineering, and Facility

Cabinet Making

Carpet INSTALL Certification

This one day course is designed for journeyman Floor Coverers only to renew their INSTALL certification

Ceiling Grid

Certified Rigger and Signaler (CRS)

Rigger and Signaler Seminar, Practical Practice and Practical only  (Written Test not included as it’s taken off site at a Pearson Vue location)

Clases de ingles de construccion

We are excited to share this great learning opportunity for Spanish speaking members! We will be offering English classes (focusing on Construction terminology) Scan the barcode to register. We have limited spots available. It starts in 2 Weeks, October 6th from (6PM to 8PM)! Runs for 8 weeks on Monday and Weds. *Available remote site

Cleanroom Construction CITF

Computer component manufacturers and companies involved in space age technologies need clean rooms. This 24 hour workshop is designed to train members in this rapidly expanding market.

Concrete Floor Polishing Practical

THIS COURSE HAS BEEN DESIGNED FOR FLOOR COVERERS . This 24 hour hands-on course takes the participant through the steps for preparation, burnishing and polishing concrete slab floors using the WerkMaster Ultra Floor Systems & Solutions equipment.  Actual course time fluctuates based on condition of training areas.

Concrete I

This course presents many of the basic and most important aspects of concrete formwork, including formwork materials, form hardware, and formwork safety practices. UBC members will learn how to fabricate simple wall forms for a footing form and a foundation wall form in a safe and efficient way.

Concrete Step Footing Class

Concrete class to learn to work on elevation changes.  Set step footings and install symons panels.

Confined Space (CITF)

This 16-hour hands-on course covers the hazards of working in confined spaces. Participants will learn the duties and responsibilities required by OSHA safety standards. This training is required for persons supervising, entering, or monitoring confined space activities. This training is a 16 hour class this is a pre-requisite eligible course to obtain the UBC/CITF Construction

Construction Master Pro

This course is based on the Construction Master Pro User Guide Curriculum. Topics covered include materials estimation, stair and rafter calculations, and layout techniques. Practical, job-related projects will be emphasized.  We ask that you purchase the calculator PRIOR TO THE CLASS START DATE at the discounted price of $40.00 from us.  Payment must be made

Construction Master Pro /Advanced

This course is an advanced version of the New Construction Master Pro Class. Members taking this class should have already taken the introductory class.  Topics covered include advanced rafter and stair layout. Advanced crown moulding cut calculations, leveling instrument calculations converting degrees, minutes and seconds for slope layout. Practical, job-related projects will be emphasized.  We

Construction Site Safety Management and Leadership (CITF)

Learn how to communicate safety protocols to ensure a safe work environment. This training is designed to introduce construction workers, particularly those with supervisory responsibilities such as foremen, to safety leadership principles and give them the skills to be a safety leader who can help create and sustain safe and productive job sites. Everyone, from

10th Edition Modifications to Energy Codes, Decks, & Structural Elements – Continuing Education course for CSL – 2025-2027

This 12-hour course addresses Changes to the 10th edition Energy codes, Decks, Structural elements, Appendex AQ, ADU’s, Concrete footings, and the Stretch Energy Code Guidance Document by DOER *This course satisfies the 12-hour Continuing Education classes required by the State of Massachusetts for your Construction Supervisors License. *Members seeking Continuing Education for CSL credits: The state DOES

Cove Base Installation

Floor Coverers Only- These 8 hour class will teach students the proper techniques of scribing inside corners, gauging outside corners as well as applying adhesive when installing Cove Base.

CPR-AED

CPR-AED

CRS Practical Test only

CRS Refresher

Rigger and Signaler Seminar to refresh prior to Written Test (not included as it’s taken off site at a Pearson Vue location)

CT Welding and Cutting-10 Week Course

WELDING CLASSES ARE MONDAY-THURSDAY 5:30PM-9:30PM FOR 10 WEEKS. The date listed below is the start date. This introductory hands-on course covers various types of welding and cutting. Students will get practice in oxyacetylene torch work and arc welding. The Welding Certification Test will be available upon request.

Doors and Hardware

This hands-on course covers all aspects of door and frame preparation and installation. In addition, industry standards and codes for hardware installation will be covered. tools list: Hard Hat, Safety glasses, gloves, hammer, tape measure, combination square, #2 screwdriver, utility knife, vice grips or pliers, adjustable wrench, regular pencil and notebook. *first class you will

Doors & Hardware – instalación de puertas y herrajes (Clase Enseñada en Español)

Este curso práctico abarca todos los aspectos de la preparación e instalación de puertas, marcos y herrajes. Se cubrirán las normas y códigos de la industria para la instalación de herrajes. Lista de herramientas: Casco, gafas de seguridad, guantes, martillo, cinta métrica, escuadra combinada, destornillador n.° 2, cúter, pinzas de presión o alicates, llave inglesa

Drug and Alcohol Awareness – Site Safety

This course is an elective course that can help fulfill the requirement for an individual applying for a Site Safety Training Card. THIS IS AN AWARENESS-LEVEL TRAINING ONLY and does not provide any other qualification or authorization outside of the Site Safety Training Card. In order to continue to operate in the City of New

Drywall Certification Test

Members are required to complete a metal stud framed project with drywall attached in a 4-1/2 hour timed test. The project is assessed according to given standards. This is not an instructional class.  Please see Introduction to Metal Framing for an instructional class

Drywall Certification Test Prep

This 18 hour course is designed to prepare journeymen and apprentices for the Drywall Certification Test.  It will focus on tips and tricks-of -the-trade to further develop the necessary skills and understanding of proper technique to frame faster and hang drywall more efficiently. Prerequisite: All students  must have completed the INTRODUCTION TO METAL FRAMING course before

Drywall Production

This 24 hour class teaches methods of metal frame, stud and drywall layout to minimize waste and maximize productivity for the installer. Members will practice cutting and setting materials to reduce steps to the finish product. -all levels of expertise welcome Tool List: ▪            Tool Belt ▪            Hard Hat ▪            Safety Glasses (Clear) ▪            Gloves

Drywall Production-CP

This 24 hour class teaches methods of stud and drywall layout to minimize waste and maximize productivity for the installer. Members will practice cutting and setting materials to reduce steps to the finish product.  This is not an introductory class.  Students should have some prior Drywall experience. CP- This class can be taken as a

English as a Second Language (ESL)

This course provides instruction in practical conversational English. Listening comprehension, pronunciation, and basic reading and writing skills will be emphasized.

Foreman Training: Entrenamiento para Encargado del Trabajo/Foreman (CLASE ENSEÑADA EN ESPAÑOL)

Este curso de 24 horas, diseñado para foreman/encargado existentes y trabajadores con experiencia, los equipará con las habilidades personales y profesionales necesarias para servir como un foreman/encargado de proyecto exitoso. Los participantes del curso deberán aplicar los objetivos entre sesiones de clase y luego participar en evaluaciones críticas revisadas por pares de sus técnicas y

Ergonomics (CITF)

Ergonomics is a branch of science that aims to learn about human abilities and limitations, and then apply this learning to improve people’s interaction with products, systems and environments. Ergonomics aims to improve workspaces and environments to minimise risk of injury or harm. So as technologies change, so too does the need to ensure that

Estimating

This course provides an introduction to estimating practices used in the construction industry. The student will learn traditional and electronic methods for determining costs and bid preparation. Background information on materials and methods used in the construction process will be presented. The outline for the course follows the Construction Specifications Institute (CSI) MasterFormat 2004 divisions.

Estimating

This course provides an introduction to estimating practices used in the construction industry. The student will learn traditional and electronic methods for determining costs and bid preparation. Background information on materials and methods used in the construction process will be presented. The outline for the course follows the Construction Specifications Institute (CSI) MasterFormat 2004 divisions.

Exterior Composite Panels

This 16 hour course introduces the members to installation methods of building envelope systems including barrier, substructure, and panels.

Construction Fall Protection (CITF)

This 8 hour course addresses safety requirements when working from an elevated area such as stairs, ladders, scaffolds, aerial lifts and steel erection. It also addresses how to use, inspect and maintain personal protective equipment. ***If a member requires this training for an SST card, please contact your local training center to make sure this

Finish Carpentry

This 24-hour hands-on introductory course covers scribing, cutting, and installation of various trim members, wall panel systems, and installation of basic cabinets and counter-tops.

Fire Stop

Firestops prevent unprotected horizontal and vertical penetrations in a fire-resistance-rated wall or floor assembly from creating a route by which fire and smoke can spread that would otherwise have been fire resisting construction

Firestop – Online

First Aid

First Aid

First Aid, CPR, AED

This 8 hour certification course provides instruction in procedures for determining care and treatment for the injured or ill. This certification is a requirement for all apprentices and journeymen as part of the last Collective Bargaining Agreement’s Basic Training Program.

First Aid, CPR, AED, & Bloodborne Pathogens

This 8 hour certification course provides instruction in procedures for determining care and treatment for the injured or ill. This certification is a requirement for all apprentices and journeymen as part of the last Collective Bargaining Agreement’s Basic Training Program.

Resilient Flash Cove Installation

Floor Coverers only This 8 hour class will cover the following techniques: Installing Metal Cap Inside And Outside Corners Freehand Fitting Sheet Vinyl Inside And Outside Corners Installation Of Booted And “V”-Pluged Outside Corners  

Flowserve Qualified Pump Repair Technician- Level 1

Foreman Technical Writing

This 16-hour online course enables participants to practice communicating with clear and concise spreadsheets, emails, reports, documentation, and proposals that demonstrate competence and confidence. This course is designed to working together in small groups and requires the use of a computer with both Microsoft Excel and Microsoft Word.

Foreman Training

This course allows participants to learn about the responsibilities of UBC foreman. The skills required of foremen, such as communication, job planning, scheduling, completing reports, and managing a crew are all discussed. The central role of the foreman as the guardian of crew safety on the job site is explained thoroughly. The importance of interpersonal

Foreman Training – Online

This 32-hour course, designed for existing foreman and experienced craftsmen, will equip them with the personal and professional skills required to serve as a successful project foreman. Course participants will be required to apply objectives between class sessions and then participate in peer reviewed critical assessments of their techniques and results. Topics covered will include:

Construction Site Safety Management & Leadership (CITF)

Learn how to communicate safety protocols to ensure a safe work environment. “The Foundations for Safety Leadership (FSL) training is designed to introduce construction workers, particularly those with supervisory responsibilities such as foremen, to safety leadership principles and give them the skills to be a safety leader who can help create and sustain safe and

Framing and Drywall Production NY Elective

Gang Forms

Gas Turbine Familiarization, HYTROC Bolting Technician Qualification and Human Performance

Hazard Communication and Chemical Safety (CITF)

This 8 hour workshop covers training requirements of OSHA’s updated HazCom standard, 1910.1200. It will teach you how to read and understand the new Global Harmonized chemical warning system (except for those requirements dealing with the employer’s job-specific chemical hazard information). Participants will learn to read GHS-compliant chemical labels and SDSs and to recognize chemical

Hazwoper

This 40-hour hands-on training qualifies workers in accordance with OSHA’s hazardous waste operations and emergency-response standards.

Hazwoper Refresher

This 8-hour refresher course recertifies members for another year of qualification in accordance with OSHA’s hazardous waste operations and emergency response standards.

Hilti Power Actuated Tool Training

Hilti powder actuated tool qualification is a 2 hour hands on course offering the Hilti card. Participants must have their own PPE including hard hat, hearing protection, safety glasses, boots and work gloves.

Hoisting Continuing Ed

This 6-hour class meets the continuing education requirements for those renewing their Massachusetts Department of Public Safety class HE-1C license (Rough Terrain Powered Industrial Truck).

Hot Work Permit Certificate (Spanish)- Permiso para Trabajos en Caliente (Clase Enseñada en Español)

Informacion del Entrenamiento CIUDAD DE BOSTON: A partir del 1 de enero de 2025, el Departamento de Bomberos de Boston aplicará un requisito de renovación de tres años en el Programa de capacitación en seguridad en trabajos en caliente. Esto significa que al presentar el Certificado de capacitación en trabajos en caliente de la NFPA,

Hot Works Permit Certificate

Participants in this course must show State issued drivers’ license or federal identification card and UBC ID card!  Member must also have an active email account in order to register for the course and in order to complete testing. (Please note that the day before class (or the day of class) you will receive an

ICRA Awareness CSL CE – Online

This course satisfies 8 hours of the 12 hours required by the State of Massachusetts Continuing Education  for a members Construction Supervisors License. It discusses health hazards associated with working in Health-Care Facilities  

ICRA Best Practices in Health-Care Facilities Online and Hands-on (Albany)

This course is a hybrid. The first 16 hours are held Online. The last 8 hours of the course is the hands-on portion and will be held at the facility listed in the course title. This 24-hour course covers proper construction procedures and protocols for working in health care facilities. The course promotes awareness of

ICRA Best Practices in Health-Care Facilities Online and Hands-on (Boston)

This course is a hybrid. The first 16 hours are held Online. The last 8 hours of the course is the hands-on portion and will be held at the facility listed in the course title. This 24-hour course covers proper construction procedures and protocols for working in health care facilities. The course promotes awareness of

ICRA Best Practices in Health-Care Facilities Online and Hands-on (Long Island)

This course is a hybrid. The first 16 hours are held Online. The last 8 hours of the course is the hands-on portion and will be held at the facility listed in the course title. This 24-hour course covers proper construction procedures and protocols for working in health care facilities. The course promotes awareness of

ICRA Best Practices in Health-Care Facilities Online and Hands-on (Millbury)

  This course is a hybrid. The first 16 hours are held Online. The last 8 hours of the course is the hands-on portion and will be held at the facility listed in the course title. This 24-hour course covers proper construction procedures and protocols for working in health care facilities. The course promotes awareness

ICRA Best Practices in Health-Care Facilities Online and Hands-on (Rochester)

This course is a hybrid. The first 16 hours are held Online. The last 8 hours of the course is the hands-on portion and will be held at the facility listed in the course title. This 24-hour course covers proper construction procedures and protocols for working in health care facilities. The course promotes awareness of

ICRA Best Practices in Health-Care Facilities Online and Hands-on (Syracuse)

This course is a hybrid. The first 16 hours are held Online. The last 8 hours of the course is the hands-on portion and will be held at the facility listed in the course title. This 24-hour course covers proper construction procedures and protocols for working in health care facilities. The course promotes awareness of

ICRA Best Practices in Health-Care Facilities Online and Hands-on (Yalesville)

This course is a hybrid. The first 16 hours are held Online. The last 8 hours of the course is the hands-on portion and will be held at the facility listed in the course title. This 24-hour course covers proper construction procedures and protocols for working in health care facilities. The course promotes awareness of

ICRA: Best Practices In Health-Care Construction (CITF)

This 24-hour course covers proper construction procedures and protocols for working in health care facilities. The course promotes awareness of infection control in health-care facilities and work practices to protect patients, staff, the public and the UBC members working in these types of facilities. This training is recommended for carpenters working in healthcare facilities.

ICRA: Construction Trades Best Practices Awareness- (CSL CE)

 (Satisfies 8 hours of the 12 hour MA Construction Supervisor License renewal requirement)This course is designed for a one-day workshop for hospital personnel and construction professionals, including professionals in trades. It presents an awareness chapter covering aspects of the unique environment of an occupied health-care facility, professionalism, and regulatory agencies and organizations. Administrative controls governing

ICRA: Construction Trades Best Practices Awareness

Industrial Lift

Industrial Lift

Insulating Concrete Forms

This hands-on course teaches the proper handling, assembly, and pouring of concrete for Insulating Concrete Forms. Topics covered include door and window buck installation, bracing, and scaffolding.

Interior Systems

Improve your Interior Systems Skills, walk-ins, any level welcome: Metal Stud Drywall Layout Every Thursday 5PM-9PM & Saturday 7am-3:30PM

Interior Systems Layout

This 24-hour hands-on course introduces the student to methods, materials, and tools used to layout simple to complex interior layout projects. Print reading and interpretation will be emphasized. Required Tools: Tool Belt Hard Hat Safety Glasses (Clear) Gloves Tool Box (Lockable) Hammer (16OZ or 20OZ) Tape Measure (20’ to 30’) Chalk Line & Reel Pencils,

Interior Systems Layout (En Español) Diseño de sistemas interiores

Este curso práctico de 24 horas presenta a los estudiantes métodos, materiales y herramientas que se utilizan para diseñar proyectos de diseño de interiores simples a complejos. Habrá un enfoque en lectura impresa e interpretación. *Debes haber completado el Curso de Lectura de  Impresa (Print Reading) para poder tomar esta clase. Lista de herramientas Casco

Interior Systems Layout Hybrid Online/Hands-on (Millbury)

This course introduces the student to methods, materials, and tools used to layout simple to complex interior layout projects. Print reading and interpretation will be emphasized.   The class scheduled in May: the first 3 classes will be online via zoom and the 8 hours on Saturday will be “hands-on” training at our Millbury facility.

Intro to Ceilings

Intro to Flooring

Intro to Hardware

Intro to Hardware

Intro to Layout

Introduction to basic interior and exterior layout.    

Intro to Metal Framing – Introducción a la estructura metálica y paneles de yeso

This hands on training is available to both English and Spanish speaking members! Drywall cert available for journeyman level members. Este curso práctico cubre la identificación de materiales, las técnicas de corte adecuadas, la instalación de rieles y montantes y el armazón especializado básico. * Tenga en cuenta que es posible que se ofrezca una

Intro to Soffit Framing

Intro to Total Station – Hilti & Trimble

Intro to Trim

Intro to Trim

Intro to VCT

Introduction to Concrete Floor Polishing

This 8-hour classroom training introduces the floor coverer member to tools, materials and processes to repair and surface concrete floors.  This class counts as an INSTALL refresher course for those members currently certified.

Introduction to Concrete Formwork

This hands-on course provides a basic working knowledge of concrete formwork. Topics included are installation of job-built and manufactured forms, bridge forms, hardware, concrete stairs, layout and setting of walls and decks.

Introduction to Machinery ‘Shaft’ Alignment

Introduction to Metal Framing

This hands-on course covers materials identification, proper cutting techniques, track and stud installation, and basic specialized framing.   Tools List: Tool Belt Hard Hat Safety Glasses (Clear) Gloves Tool Box (Lockable) Hammer (16OZ or 20OZ) Tape Measure (20’ to 30’) Chalk Line & Reel Pencils, Markers etc… Construction Master Pro Speed Square Utility Knife w/Fixed

Introduction to Pile Driving

This introduction course will provide the member with the basic understanding of Pile Driving to include Rigging and Signaling, all types of Piles, Lagging, Shoring, Welding, welding Certification and job safety related to Pile Driving/ Dock Building, working with cranes and how they operate  will also be explained.

Introduction to Rigging Online

This course is an introduction to Rigging. It covers basic safety topics and rigging techniques. It is a good gauge to see if a member wants to take the full rigging course.

Introduction to Solar Installation

This course introduces students to the standard used in installation and mounting of solar panels.

Laser

Laser

LEED Prep & Awareness

This class is for anyone who is interested in a comprehensive overview of the LEED (Leadership in Energy and Environmental Design) process. The class is designed to both prepare for the LEED Green Associate Exam and/or become fluent in the LEED Green Building process and terminology. There are currently 366 LEED Registered Projects in Massachusetts

Machinery Installation

Mass. Construction Supervisors License Prep

This 24-hour course prepares the member to take the Mass. Construction Supervisors’ License Exam. This course covers the current editions of the applicable commercial and residential codes. Note: The State of Massachusetts requires a minimum of 3 years of full-time documented employment in the construction field in order to be eligible to take the exam.

Math for the Trades I

This 16-hour course covers general math, fractions, decimals, and measurement as they apply to the carpentry trade. Practical hands-on applications will be emphasized. This course is required for apprentices as a condition of graduation.

Math for the Trades II

This 12-hour course introduces students to principles of laying out various shapes and calculating area and volume as they apply to carpentry. Practical hands-on applications will be emphasized. This course is required for apprentices as a condition of graduation. Prerequisite: Successful completion of Math for the Trades 1.

Metal Frame & Drywall Skills Practice

Need to brush up on metal stud, drywall install? Walk ins welcome! Instructor will be on site to help you assess where you can brush up on your skillset. Open at our Boston workshop space. This into a full 24 hour course starting Tuesday 10.15.24 (please see course dates below) .

MEWPS En Español (elevadores móviles en plataformas del trabajo)

Este entrenamiento práctico de calificación de 8 horas combina instrucción en el aula con técnicas operativas para capacitar a los participantes en la operación segura de “ELEVADORES MÓVILES EN PLATAFORMAS DEL TRABAJO” de conformidad con las reglamentaciones de OSHA y las normas ANSI. *MEWP: máquina destinada a trasladar personas, herramientas y materiales a puestos de

MEWPS — Mobile Elevating Work Platforms — Aerial Lift Update Course

This 2-hour Aerial Lift Operator supplemental course meets the new American National Standards Institute safety requirements for operating MEWPs. This required training has been in effect since March 1, 2020. YOU MUST HAVE ALREADY TAKEN THE 8-HOUR UBC AERIAL LIFT OPERATOR QUALIFICATION COURSE TO PARTICIPATE IN THIS TRAINING.  

Millwright – 16/OSHA -10

MSHA Refresher

NY Elective Welding

NYS Asbestos Initial Courses- Contractor/Supervisor Initial (40-hours)

This 40-hour course is designed for personnel who supervise asbestos abatement projects, to ensure proper asbestos abatement work procedures, asbestos handling and individual safety procedures are adhered to. This course is conducted over a minimum of five (5) days. The total instruction time includes both formal classroom instruction as well as physical hands-on training. Successful

OCCO (Overhead Crane Certified Operator

Practical Practice and Practical only

OSHA 10-Hour for Construction

This 10-hour construction safety course provides an overview of the OSHA safety and health standards for the construction industry. Participants learn about the rights and responsibilities of the employee and the employer. A 10-hour OSHA certification card will be awarded upon successful completion of this course. This course is required for all members. This course

OSHA 10 – Online

This 10-hour construction safety course provides an overview of the OSHA safety and health standards for the construction industry. Participants learn about the rights and responsibilities of the employee and the employer. A 10-hour OSHA certification card will be awarded upon successful completion of this course. This course is required for all members. This course

OSHA 30 Horas (Clase Enseñada en Español) Online

OSHA 30 Hour for Construction

This 30-hour construction safety course provides an in-depth view of the OSHA safety and health standards for the construction industry. Participants will learn about the rights and responsibilities of the employee and employer. A 30-hour OSHA certification card will be awarded upon successful completion of this course. This course is required for all superintendents, foremen,

OSHA 30 – Online

This 30-hour construction safety course provides an in-depth view of the OSHA safety and health standards for the construction industry. Participants will learn about the rights and responsibilities of the employee and employer. A 30-hour OSHA certification card will be awarded upon successful completion of this course. This course is required for all superintendents, foremen,

OSHA de 10 horas (Clase Enseñada en Español)

OSHA de 30 Horas (Clase Enseñada en Español)

Este curso de seguridad de la construcción de 30 horas cubre en profundidad los estándares de seguridad y salud de OSHA para la industria de la construcción. Los participantes aprenderán sobre los derechos y responsabilidades del empleado y el empleador. Se otorgará una tarjeta de certificación de OSHA de 30 horas al completar con éxito

Panel Max

This course will cover the use of the Panel Max machine and will prepare the students to build complex drywall soffits and columns.

PCI – Intro to Cleanroom – New York

This course addresses procedures to install ceilings, floors and walls of a cleanroom.

PDC Solar Panel Install

After completion of this class members will be able to layout and install solar panels.

Peri Skydeck System

This 16 hour class is designed to introduce members to the Peri Skydeck system. This system is used for concrete slab work. The class will include the safe handling of the system. The most productive way of overcoming obstacles while working with the system and the different configurations you can create with it.

Power Industrial Truck Operator – Industrial

  This is a hands-on industrial forklift training course. Topics covered are load capacity, hand signals, safe operating techniques, equipment, and job-site inspections. Please note: This qualification course is in preparation for Department of Transportation licensing.

Powered Industrial Truck Operator – Industrial En Español Operador de montacargas industrial

Este es un curso práctico de capacitación en montacargas industriales. Los temas que se abordan son capacidad de carga, señales manuales, técnicas de operación segura, equipos e inspecciones en el lugar de trabajo. Nota: Este curso de certificación es un curso preparatorio para la obtención de la licencia del Departamento de Transporte.

Powered Industrial Truck Operator Refresher

Pre-requisite: Powered Industrial Truck Operator Students will be required to operate the forklift using previously learned techniques including hand signals.  The instructor will work with each student individually so please call 508-792-5443 option 4 to reserve a time slot between 7AM and 12 Noon .

Powered Industrial Truck Operator – Rough Terrain

                            This is a hands-on rough-terrain forklift training course. Topics covered are load capacity, hand signals, safe operating techniques, equipment, and job-site inspections. (“lull”/Class 1: Hoisting) Please note: This qualification course is in preparation for Department of Transportation licensing. *This course unfortunately

Powered Industrial Truck Operator – Rough Terrain En Español Operador de montacargas industriales todo terreno

Este es un curso práctico de capacitación sobre montacargas para terrenos difíciles. Los temas que se tratan son capacidad de carga, señales manuales, técnicas de operación segura, equipos e inspecciones en el lugar de trabajo. Tenga en cuenta: este curso de calificación es una preparación para la obtención de la licencia del Departamento de Transporte.

First Aid, CPR, AED (Primeros Auxilios) – (Clase Enseñada en Español)

Este curso de certificación, 8 horas en duración, dispone  de instrucciones en el procedimiento para determinar el tratamiento y cuidado de un(a) lesionado(a) o enfermo(a). Este certificado Es requisito para los aprendices y jornaleros (journeymen) del programa de entrenamiento básico de acuerdo a la última Negociación Colectiva.

Print Reading II

This course is designed to provide a more advanced experience for the person who already has basic exposure to plans and specifications. All major areas of construction plans will be covered including specs, schedules, site work, concrete, carpentry, doors, hardware, ect. Course length:16 hours

Print Reading I

This course introduces students to the standards used in interpreting prints and specifications. *this class is primarily offered online but may sometimes be offered at local training centers. Please see class location cited on the dates.

Print Reading – Spanish – Lectura de impresa

Este curso de 32 horas introduce a los miembros a los estándares utilizados en la interpretación de impresiones y especificaciones. La clase se imparte en español. ****Las horas de clase restantes (de la clase que empieza en febrero) aún están pendientes, pronto publicaremos las horas restantes.***

ProCore Training

This 8 hour workshop style course will familiarize participants with ProCore construction management software.  Topics covered will include:  Navigating software to work with construction prints, RFIs, Punch-lists, Specifications, etc.  Hands on application will reinforce learned skills into real world scenarios.  Electronic Tablets will be provided for students to use during sessions.  

ProCore Training – en español

Este curso de 4 horas familiarizará a los participantes con el software de gestión de la construcción ProCore. Los temas que se abordarán incluyen: manejo del software para trabajar con planos de construcción, RFI, listas de verificación, especificaciones, etc. La aplicación práctica reforzará las habilidades aprendidas en situaciones reales. Se proporcionarán tabletas electrónicas para que

Project Survey & Layout

This 32 hour hands-on journey-level course covers the skills necessary to set up, use and maintain leveling and layout instruments for the purposes of establishing grades, turning angles and setting building lines. A working knowledge of print reading is highly recommended.

Construction Fall Protection en Español (Protección contra caídas en la construcción)

Este curso de 8 horas aborda los requisitos de seguridad cuando se trabaja desde un área elevada como escaleras, escaleras de mano, andamios, elevadores aéreos y montajes de acero. También se revisa cómo usar, inspeccionar y mantener el equipo de protección personal.

QML800 QuickMark Layout System

This system uses 2 laser beams that literally mark a visible “X” on the point. The lasers are controlled with an intuitive Android tablet with standard gestures and controls. The user simply selects the desired point and the lasers automatically find that point. It is fast, efficient and accurate. In this 16-hour course the user

Resilient INSTALL Certification

This one day course is designed for journeyman Floor Coverers only to renew their INSTALL certification.

Rigger and Signaler Qualification (CITF)

This 40-hour hands-on course covers construction rigging hardware, procedures, and load calculations in compliance with OSHA and state regulations. Qualification will be issued upon successful completion of written exams and hands-on live crane signaling operation. Note: Classes listed at the “Boston or Manchester, NH” locations will have Saturday classes in Millbury. Prerequisites: No prerequisites Expiration

Rigger and Signaler Qualification Refresher (CITF)

This 16-hour Rigging Re-fresher course covers Safety regulations and practices related to rigging, rigging hardware and safe rigging practices.Participants must hold a current 40-hour Rigging Qualification Card. Materials need for class: pencils, notebook and calculator. Members that currently hold a Rigging Qualification must complete a 16-hour refresher in order to remain valid. Starting January 1,

Rigging Qualification to Certification Prep

 **Prerequisite: Rigger & Signaler Qualification (CITF) ** After successful completion of the 40-hour Rigger & Signaler Qualification class, Members have up to 1 year to take the Rigging Certification (CRS) exams without having to complete the entire class. This involves taking the Proctored Practical exam on Saturday at Millbury and scheduling yourself to take the

Rigging Safety CSL CE Online/Hands-on

This 12-hour course addresses safety regulations and rigging practices related to rigging, rigging hardware, and safe rigging practices. Hands-on inspections and rigging projects are emphasized along with critical hoists. This course satisfies the 12-hour continuing education classes required by the State of Massachusetts for your Construction Supervisors License. Please Note: The first 4 hours of

Rigging Safety CSL CE

This 12-hour course addresses safety regulations and rigging practices related to rigging, rigging hardware, and safe rigging practices. Hands-on inspections and rigging projects are emphasized along with critical hoists. *This course satisfies the 12-hour Continuing Education classes required by the State of Massachusetts for your Construction Supervisors License. *Please note this is not a Qualification

Robert’s Rules of Order

This is a 4 hour class. Robert’s Rules of Order is the system that most organizations including ours use to run their meetings and structure the organization. Understanding and learning Robert’s rules will allow you participate easier and help improve how we function as a union. The union is the collection of all our voices

Roof (Rafter) Framing

This introductory hands-on course covers calculating, layout, cutting, and installation of various roof rafters.

Rough Terrain

Rough Terrain

Safety Leadership Pathway Information Session

The course description:  This informational session will prepare participants to embark on a pathway towards a career in safety management.  Topics will include: (1) How to achieve the Construction Site Safety Specialist (CSSS ) designation from the UBC as well as additional credentials from the Board of Certified Safety Professionals (BCSP).  (2)  How to prepare

Scaffold Refresher DOB Approved

Scaffold User (CITF)

This 8 Hour OSHA compliant course will cover safety issues involved when using Scaffolding, including proper set up for fall protection. This certification is valid for 4 years from the date of completion. THIS CLASS SATISFIES THE SCAFFOLD REQUIREMENT FOR THE CURRENT CBA. ***If a member requires this training for an SST card, please contact

Scaffolding Erector Qualification- 40 Hours

This 40-hour hands-on OSHA-compliant qualification course covers proper procedures required for safe and efficient scaffold erection. The three major types of supported scaffolding are emphasized. A certification, valid for 4 years, will be issued upon successful completion of this course. NOTE: FOR NORTHERN NEW ENGLAND CLASSES, DATES FOLLOWING THE FIRST SESSION MAY BE SUBJECT TO

Scaffolding Qualification Refresher

This 8-hour re-certification workshop refreshes the UBC 32 / 40 Hour Scaffolding Erector Qualifications.  Current regulations and new procedures and products are covered. IF YOUR CERTIFICATION IS EXPIRED YOU ARE NOT ELIGIBLE TO TAKE THIS CLASS. (THERE IS NO LONGER A 1 YEAR GRACE PERIOD SINCE EXPIRATION TO RENEW) You must take the  40 hour Scaffold

Sexual Harassment Training

This 2 hour training course will focus on specific examples of prohibited sexual harassment behavior and other prohibited discriminatory and retaliatory actions.  The class will also provide discussion and interaction, and explain the employees rights under the law. These classes are compliant with New York State’s minimum requirements and also provide a blueprint for eliminating

Significant Changes to the MA 10th Edition of the IBC & IRC Building Code (CSL Cont Ed)

This 12-hour course addresses the significant changes between the 2015 and the 2021 versions of the ICC International Building and Residential codes. *This course satisfies the 12-hour Continuing Education classes required by the State of Massachusetts for your Construction Supervisors License. *Members seeking Continuing Education for CSL credits: The state DOES NOT allow you to

Silica Awareness Training (CITF)

Silica Awareness Training is a 4 hour class this is a pre-requisite eligible course to obtain the UBC/CITF Construction Site Safety Specialist (CSSS) Certificate Program also a stand alone course

Silica Awareness – (CSL CE)

This course is  a 4-hour workshop that explores the peculiar hazards of respirable crystalline silica (RCS). The definition of silica, its properties, and the dangers it presents are all described. The particular health hazards are also presented along with ways in which UBC members can protect their health and the health of their families and

Soffit Framing

This 24 hour course will cover layout as well as building different types of soffits.  The instructor will teach specific techniques for building unbraced, braced, beam, eyebrow, light pockets and draft soffits. This class will also cover prefabrication soffit components.

Solid Surface

Solid-Surface Installer Certification

This 16-hour hands-on, journey-level certification course covers procedures for fabricating, handling, machining, finishing, and repairing solid-surface materials in accordance with manufacturers’ specifications.

Solid Surface Refresher

This 8-hour Refresher journey-level certification course refreshes the Solid Surface certification and covers procedures for fabricating, handling, machining, finishing, and repairing solid-surface materials in accordance with manufacturers’ specifications.

SOMA/DEME Offshore Rigging Certification

SOMA provides training for offshore crane operators and lifting operations. Their maritime and offshore training is essential for members involved in onshore and offshore lifting for various activities. TOOL LIST: Tape Measure, Linesman Plyers, Spud Wrench, PPE, weather gear *this pre-requisite is MANDATORY to have active prior to taking this training. -40 hr Rigger &

SST Refresher

This class is for the Department of Building, 40 hour Site Safety Refresher only and members who’s card is in the last 12 months prior to expiration can register for this class

Stair Layout and Framing

This 16-hour hands-on course covers formulas and methods used to calculate and lay out stair stringers based on rise and run in compliance with residential and commercial codes.

Structural Insulated Panel Systems (SIPS)

This 32-hour hands-on course explains the process and techniques required for the fabrication and installation of structural insulated panel systems. Job planning, tool selection, safety, and productivity will be emphasized.

Substrate Prep

Superintendent Training Program

Superintendent Training Program

Symons Forms

Tarkett Level I

This one day course is designed for journeyman Floor Coverers. The certification is a pass/fail test that includes a written test and demonstration of hands-on skills. The skills necessary are  direct scribe using dividers, pattern scribing, construct and heat weld a seam, install inset and heat weld, and repair a damaged area.

Total Station

This 32-hour hands-on course covers setup and operation of total station equipment and its application to field layout. Prerequisite: Layout and Leveling Instruments 32-hour training course.

Total Station – Hilti

Hilti’s tool technology allows layout to be completed more quickly, efficiently, and accurately. This tool also brings improved accuracy, faster layout speed, advanced prism tracking, auto calibration, but it does require training to use. This is an 8 hour hands-on training course.

Total Station – Trimble

Scaffold User en español (Usuario de andamio)

Este curso de 8 horas que cumple con OSHA cubrirá los problemas de seguridad relacionados con el uso de andamios, incluida la configuración adecuada para la protección contra caídas. Esta certificación es válida por 4 años a partir de la fecha de finalización. ESTA CLASE SATISFACE EL REQUISITO DE ANDAMIOS PARA EL CBA ACTUAL.

Welding

Welding Practice schedule is as follows: Boston, MA – 750 Dorchester Ave-2nd and 4th Saturdays 7 AM-3:30PM – Wednesday nights are reserved for members to obtain their hours for their welding tickets and are not normally used for practice nights Manchester, NH – 920 Candia Rd – Tuesdays & Thursday 5-9 PM, 2nd and 4th Saturdays 7AM-3:30

Welding and Cutting

This introductory 10-Week hands-on course starts on 9/9-11/18 and covers various types of welding and cutting. Students will get practice in oxyacetylene torch work and arc welding. The Welding Certification Test will be available upon request.

Welding Upgrade and Test Prep

Students will get practice in oxyacetylene torch work and arc welding. The Massachusetts Welding Certification Test will be available upon request at the instructor/inspector’s discretion. This is not an introductory class.

Wet Welding & Burning Practice

Please note, this includes welding practice in the dive tank (you must be classified as a DIVER with NASCTF/certified diver to take this class) Burning  & Welding Safety- equipment set-up, Hydrogen build up dangers, Delta P dangers Burning techniques Burning Practice Welding techniques Welding Practice